Ridgid MS1250LZ Miter Saw Manual

The Ridgid MS1250LZ is a powerful 12-inch miter saw designed for precision cutting in various materials. It features a robust motor, adjustable miter and bevel angles, and a laser guide for enhanced accuracy. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Setup Instructions 4. Specifications 5. Operating Instructions 6. Maintenance and Care 7. Troubleshooting

Features at a Glance

Key features include a powerful 15-amp motor, adjustable miter angles up to 45 degrees, and a laser guide for precise cuts.

Feature	Description
15-Amp Motor	Delivers high power for cutting through various materials.
Laser Guide	Helps ensure accurate cuts by projecting a line on the workpiece.
Adjustable Miter Angles	Allows for precise angle cuts up to 45 degrees.
Bevel Adjustment	Enables bevel cuts for added versatility.
Dust Collection	Integrated system to minimize debris and keep workspace clean.

Safety Information

Always wear appropriate safety gear, including eye protection and hearing protection. Ensure the work area is clean and free of obstructions.

WARNING! Keep hands away from the cutting area and ensure the saw is unplugged when not in use.

Setup Instructions

Unpack the saw and inspect for any damage. Securely mount the saw to a stable workbench.

Attach the blade according to the instructions.
Connect the dust collection system.
Adjust the miter and bevel settings as needed.

CAUTION! Ensure all components are securely fastened before operation.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Angle Range: 0 to 45 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 45 lbs.
Dust Collection: Yes, with adapter.

Operating Instructions

To operate the saw, ensure it is plugged in and the blade is properly installed. Adjust the miter and bevel settings as required for your cut.

Power on the saw.
Position the workpiece against the fence.
Lower the blade to make the cut.
Release the trigger to stop the blade.

WARNING! Always keep hands clear of the blade during operation.

Maintenance and Care

Regularly inspect the blade for wear and replace as necessary. Clean the saw and dust collection system after each use.

CAUTION! Unplug the saw before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade does not spin	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.
Overheating	Continuous use	Allow the saw to cool down before resuming.

Service: For further assistance, contact Ridgid customer support.