Ridgid 12 Inch Dual Bevel Miter Saw Manual

The Ridgid 12 Inch Dual Bevel Miter Saw is designed for precision cutting and versatility in various woodworking projects. It features a powerful motor, dual bevel capability, and an adjustable miter angle for enhanced accuracy. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel adjustment, laser guide, adjustable miter settings, and ergonomic handle.

Feature	Description
12-inch Blade	For cutting through various materials with precision.
Dual Bevel Adjustment	Allows for angled cuts in both directions.
Laser Guide	Helps ensure accurate cuts.
Adjustable Miter Settings	For precise miter cuts up to 60 degrees.
Ergonomic Handle	Provides comfort during extended use.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Check that all safety features are functioning before use.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Adjust the blade height and angle according to your cutting needs.
Test the laser guide alignment before starting any cuts.
Practice making cuts on scrap wood to ensure accuracy.

CAUTION! Always wear safety goggles and hearing protection when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: Dual bevel up to 45 degrees.
Miter Capacity: 0 to 60 degrees left and right.
Weight: 50 lbs.
Laser Guide: Integrated laser for precision cutting.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the front of the saw. The laser guide can be activated with a switch on the handle.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

No external devices are required for operation. Ensure the saw is connected to a power source.

Use a heavy-duty extension cord if needed.
Ensure the power outlet can handle the saw's power requirements.

Tip: Always check the power supply before starting the saw.

Operating the Saw

Follow these steps to operate the saw safely and effectively.

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut using a steady motion.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade at all times.

Safety Features

The saw is equipped with several safety features to protect the user, including a blade guard, electric brake, and a safety switch.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to remove dust and debris.

CAUTION! Do not use liquids or solvents to clean the saw.

Regulatory Information

This saw complies with all applicable safety standards and regulations. For support, visit www.ridgid.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet.
Blade not spinning	Motor issue	Inspect motor and connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for reset procedures if applicable.

Service: For service inquiries, contact Ridgid customer support.